Search Our Support Documents

Category:   SKU/Item Number:
Keywords:
Displaying 3 Total Results
CADILLAC AXLE STABILIZER BEARING / SEAL KIT, with AXLE for 4T80E
SKU #: KT94125LB-KIT

FITS: CADILLAC 4T80E - DRIVERS SIDE ONLY THIS BEARING & SEAL COMBO ADDS EXTRA SUPPORT TO ELIMINATE AXLE SEAL WEAR THAT CAUSES THE AXLE TO LEAK. NOTE: NO MACHINING IS REQUIRED WITH THIS KIT. Simply install the Seal/Bearing combo into the old seal location and install the new axle. REPLACEMENT SEAL: 330749


CADILLAC 4T80E AXLE - MACHINED TO FIT 94125LB
SKU #: 94125LB-AXLE ONLY

NOTE: THIS IS A SPECIALLY MACHINED AXLE & IT CAN ONLY BE USED WITH PART NUMBER 94125LB. FITS: CADILLAC 4T80E - DRIVERS SIDE ONLY

NOTE: NO MACHINING IS REQUIRED ON THIS AXLE.


CADILLAC AXLE STABILIZER BEARING / SEAL, 4T80E
SKU #: 94125LB

FITS: CADILLAC 4T80E - DRIVERS SIDE ONLY
THIS BEARING & SEAL COMBO ADDS EXTRA SUPPORT TO ELIMINATE AXLE SEAL WEAR THAT CAUSES THE AXLE TO LEAK.

NOTE: SOME MACHINING IS REQUIRED IF YOU USE A NEW / ORIGINAL AXLE (See instruction sheet for details).

Some aftermarket axles only have a thin layer of hardness on the area that needs machining. Having one of them machined can remove all of the hardness and leave softer material that will wear faster.

IMPORTANT NOTICE...Thousands of 4T80E axles shipped into the U.S. were machined with the wrong pitch on the internal splines.  So if you are planning to buy a new axle from your auto parts store and have it machined to fit the 94125LB... be sure to check that the splines fit your transmission's shaft before having the axle machined.

WE DO OFFER AN AXLE KIT THAT DOES NOT REQUIRE MACHINING  (see KT94125LB)


REPLACEMENT SEAL: 330749


 
Fitzall
Toll Free: 1.800.527.2544 • Voice: 573.785.8238 • Fax: 573.785.3303 • info@fitzall.com
Home | Printable Brochures | New Products | Dealers | Contact Us | Advanced Search | SS Login | CMS Login
Privacy Policy | Return Policy | Shipping Policy | Terms and Conditions
Created and Maintained by Creative Design Group